Back to index

lightning-sunbird  0.9+nobinonly
Go to the documentation of this file.
00001 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
00002 /* ***** BEGIN LICENSE BLOCK *****
00003  * Version: MPL 1.1/GPL 2.0/LGPL 2.1
00004  *
00005  * The contents of this file are subject to the Mozilla Public License Version
00006  * 1.1 (the "License"); you may not use this file except in compliance with
00007  * the License. You may obtain a copy of the License at
00008  *
00009  *
00010  * Software distributed under the License is distributed on an "AS IS" basis,
00011  * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
00012  * for the specific language governing rights and limitations under the
00013  * License.
00014  *
00015  * The Original Code is the Netscape Portable Runtime (NSPR).
00016  *
00017  * The Initial Developer of the Original Code is
00018  * Netscape Communications Corporation.
00019  * Portions created by the Initial Developer are Copyright (C) 1998-2000
00020  * the Initial Developer. All Rights Reserved.
00021  *
00022  * Contributor(s):
00023  *
00024  * Alternatively, the contents of this file may be used under the terms of
00025  * either the GNU General Public License Version 2 or later (the "GPL"), or
00026  * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
00027  * in which case the provisions of the GPL or the LGPL are applicable instead
00028  * of those above. If you wish to allow use of your version of this file only
00029  * under the terms of either the GPL or the LGPL, and not to allow others to
00030  * use your version of this file under the terms of the MPL, indicate your
00031  * decision by deleting the provisions above and replace them with the notice
00032  * and other provisions required by the GPL or the LGPL. If you do not delete
00033  * the provisions above, a recipient may use your version of this file under
00034  * the terms of any one of the MPL, the GPL or the LGPL.
00035  *
00036  * ***** END LICENSE BLOCK ***** */
00038 /*
00039  *
00040  * prerr.c
00041  * This file is automatically generated; please do not edit it.
00042  */
00043 #include "prerror.h"
00044 static const struct PRErrorMessage text[] = {
00045        {"PR_OUT_OF_MEMORY_ERROR",    "Memory allocation attempt failed"},
00046        {"PR_BAD_DESCRIPTOR_ERROR",    "Invalid file descriptor"},
00047        {"PR_WOULD_BLOCK_ERROR",    "The operation would have blocked"},
00048        {"PR_ACCESS_FAULT_ERROR",    "Invalid memory address argument"},
00049        {"PR_INVALID_METHOD_ERROR",    "Invalid function for file type"},
00050        {"PR_ILLEGAL_ACCESS_ERROR",    "Invalid memory address argument"},
00051        {"PR_UNKNOWN_ERROR",    "Some unknown error has occurred"},
00052        {"PR_PENDING_INTERRUPT_ERROR",    "Operation interrupted by another thread"},
00053        {"PR_NOT_IMPLEMENTED_ERROR",    "function not implemented"},
00054        {"PR_IO_ERROR",    "I/O function error"},
00055        {"PR_IO_TIMEOUT_ERROR",    "I/O operation timed out"},
00056        {"PR_IO_PENDING_ERROR",    "I/O operation on busy file descriptor"},
00057        {"PR_DIRECTORY_OPEN_ERROR",    "The directory could not be opened"},
00058        {"PR_INVALID_ARGUMENT_ERROR",    "Invalid function argument"},
00059        {"PR_ADDRESS_NOT_AVAILABLE_ERROR",    "Network address not available (in use?)"},
00060        {"PR_ADDRESS_NOT_SUPPORTED_ERROR",    "Network address type not supported"},
00061        {"PR_IS_CONNECTED_ERROR",    "Already connected"},
00062        {"PR_BAD_ADDRESS_ERROR",    "Network address is invalid"},
00063        {"PR_ADDRESS_IN_USE_ERROR",    "Local Network address is in use"},
00064        {"PR_CONNECT_REFUSED_ERROR",    "Connection refused by peer"},
00065        {"PR_NETWORK_UNREACHABLE_ERROR",    "Network address is presently unreachable"},
00066        {"PR_CONNECT_TIMEOUT_ERROR",    "Connection attempt timed out"},
00067        {"PR_NOT_CONNECTED_ERROR",    "Network file descriptor is not connected"},
00068        {"PR_LOAD_LIBRARY_ERROR",    "Failure to load dynamic library"},
00069        {"PR_UNLOAD_LIBRARY_ERROR",    "Failure to unload dynamic library"},
00070        {"PR_FIND_SYMBOL_ERROR",    "Symbol not found in any of the loaded dynamic libraries"},
00071        {"PR_INSUFFICIENT_RESOURCES_ERROR",    "Insufficient system resources"},
00072        {"PR_DIRECTORY_LOOKUP_ERROR",    "A directory lookup on a network address has failed"},
00073        {"PR_TPD_RANGE_ERROR",    "Attempt to access a TPD key that is out of range"},
00074        {"PR_PROC_DESC_TABLE_FULL_ERROR",    "Process open FD table is full"},
00075        {"PR_SYS_DESC_TABLE_FULL_ERROR",    "System open FD table is full"},
00076        {"PR_NOT_SOCKET_ERROR",    "Network operation attempted on non-network file descriptor"},
00077        {"PR_NOT_TCP_SOCKET_ERROR",    "TCP-specific function attempted on a non-TCP file descriptor"},
00078        {"PR_SOCKET_ADDRESS_IS_BOUND_ERROR",    "TCP file descriptor is already bound"},
00079        {"PR_NO_ACCESS_RIGHTS_ERROR",    "Access Denied"},
00080        {"PR_OPERATION_NOT_SUPPORTED_ERROR",    "The requested operation is not supported by the platform"},
00081        {"PR_PROTOCOL_NOT_SUPPORTED_ERROR",    "The host operating system does not support the protocol requested"},
00082        {"PR_REMOTE_FILE_ERROR",    "Access to the remote file has been severed"},
00083        {"PR_BUFFER_OVERFLOW_ERROR",    "The value requested is too large to be stored in the data buffer provided"},
00084        {"PR_CONNECT_RESET_ERROR",    "TCP connection reset by peer"},
00085        {"PR_RANGE_ERROR",    "Unused"},
00086        {"PR_DEADLOCK_ERROR",    "The operation would have deadlocked"},
00087        {"PR_FILE_IS_LOCKED_ERROR",    "The file is already locked"},
00088        {"PR_FILE_TOO_BIG_ERROR",    "Write would result in file larger than the system allows"},
00089        {"PR_NO_DEVICE_SPACE_ERROR",    "The device for storing the file is full"},
00090        {"PR_PIPE_ERROR",    "Unused"},
00091        {"PR_NO_SEEK_DEVICE_ERROR",    "Unused"},
00092        {"PR_IS_DIRECTORY_ERROR",    "Cannot perform a normal file operation on a directory"},
00093        {"PR_LOOP_ERROR",    "Symbolic link loop"},
00094        {"PR_NAME_TOO_LONG_ERROR",    "File name is too long"},
00095        {"PR_FILE_NOT_FOUND_ERROR",    "File not found"},
00096        {"PR_NOT_DIRECTORY_ERROR",    "Cannot perform directory operation on a normal file"},
00097        {"PR_READ_ONLY_FILESYSTEM_ERROR",    "Cannot write to a read-only file system"},
00098        {"PR_DIRECTORY_NOT_EMPTY_ERROR",    "Cannot delete a directory that is not empty"},
00099        {"PR_FILESYSTEM_MOUNTED_ERROR",    "Cannot delete or rename a file object while the file system is busy"},
00100        {"PR_NOT_SAME_DEVICE_ERROR",    "Cannot rename a file to a file system on another device"},
00101        {"PR_DIRECTORY_CORRUPTED_ERROR",    "The directory object in the file system is corrupted"},
00102        {"PR_FILE_EXISTS_ERROR",    "Cannot create or rename a filename that already exists"},
00103        {"PR_MAX_DIRECTORY_ENTRIES_ERROR",    "Directory is full.  No additional filenames may be added"},
00104        {"PR_INVALID_DEVICE_STATE_ERROR",    "The required device was in an invalid state"},
00105        {"PR_DEVICE_IS_LOCKED_ERROR",    "The device is locked"},
00106        {"PR_NO_MORE_FILES_ERROR",    "No more entries in the directory"},
00107        {"PR_END_OF_FILE_ERROR",    "Encountered end of file"},
00108        {"PR_FILE_SEEK_ERROR",    "Seek error"},
00109        {"PR_FILE_IS_BUSY_ERROR",    "The file is busy"},
00110        {"PR_OPERATION_ABORTED_ERROR",    "The I/O operation was aborted"},
00111        {"PR_IN_PROGRESS_ERROR",    "Operation is still in progress (probably a non-blocking connect)"},
00112        {"PR_ALREADY_INITIATED_ERROR",    "Operation has already been initiated (probably a non-blocking connect)"},
00113        {"PR_GROUP_EMPTY_ERROR",    "The wait group is empty"},
00114        {"PR_INVALID_STATE_ERROR",    "Object state improper for request"},
00115        {"PR_NETWORK_DOWN_ERROR",    "Network is down"},
00116        {"PR_SOCKET_SHUTDOWN_ERROR",    "Socket shutdown"},
00117        {"PR_CONNECT_ABORTED_ERROR",    "Connection aborted"},
00118        {"PR_HOST_UNREACHABLE_ERROR",    "Host is unreachable"},
00119        {"PR_LIBRARY_NOT_LOADED_ERROR",    "The library is not loaded"},
00120        {"PR_MAX_ERROR",    "Placeholder for the end of the list"},
00121        {0, 0}
00122 };
00124 static const struct PRErrorTable et = { text, "prerr", -6000L, 76 };
00126 void nspr_InitializePRErrorTable(void) {
00127     PR_ErrorInstallTable(&et);
00128 }