Back to index

glibc  2.9
Classes | Functions
trampoline.c File Reference
#include <hurd/signal.h>
#include <thread_state.h>
#include <assert.h>
#include <errno.h>
#include "hurdfault.h"

Go to the source code of this file.


struct  mach_msg_trap_regargs


struct sigcontext_hurd_setup_sighandler (struct hurd_sigstate *ss, __sighandler_t handler, int signo, long int sigcode, volatile int rpc_wait, struct machine_thread_all_state *state)

Class Documentation

struct mach_msg_trap_regargs

Definition at line 27 of file trampoline.c.

Class Members
mach_msg_header_t * msg
mach_msg_option_t option
mach_msg_size_t rcv_size
mach_msg_size_t send_size

Function Documentation

struct sigcontext* _hurd_setup_sighandler ( struct hurd_sigstate ss,
__sighandler_t  handler,
int  signo,
long int  sigcode,
volatile int  rpc_wait,
struct machine_thread_all_state state 
) [read]

Definition at line 37 of file trampoline.c.

  __label__ trampoline, rpc_wait_trampoline;
  void *volatile sigsp;
  struct sigcontext *scp;

  if (ss->context)
      /* We have a previous sigcontext that sigreturn was about
        to restore when another signal arrived.  We will just base
        our setup on that.  */
      if (_hurdsig_catch_fault (SIGSEGV))
       assert (_hurdsig_fault_sigcode >= (long int) ss->context &&
              _hurdsig_fault_sigcode < (long int) (ss->context + 1));
         memcpy (&state->basic, &ss->context->sc_parisc_thread_state,
                sizeof (state->basic));
         state->set = (1 << PARISC_THREAD_STATE);
         assert (! rpc_wait);
         /* The intr_port slot was cleared before sigreturn sent us the
            sig_post that made us notice this pending signal, so
            _hurd_internal_post_signal wouldn't do interrupt_operation.
            After we return, our caller will set SCP->sc_intr_port (in the
            new context) from SS->intr_port and clear SS->intr_port.  Now
            that we are restoring this old context recorded by sigreturn,
            we want to restore its intr_port too; so store it in
            SS->intr_port now, so it will end up in SCP->sc_intr_port
            later.  */
         ss->intr_port = ss->context->sc_intr_port;
      /* If the sigreturn context was bogus, just ignore it.  */
      ss->context = NULL;
  else if (! machine_get_basic_state (ss->thread, state))
    return NULL;

  if ((ss->actions[signo].sa_flags & SA_ONSTACK) &&
      !(ss->sigaltstack.ss_flags & (SS_DISABLE|SS_ONSTACK)))
      sigsp = ss->sigaltstack.ss_sp + ss->sigaltstack.ss_size;
      ss->sigaltstack.ss_flags |= SS_ONSTACK;
      /* XXX need to set up base of new stack for
        per-thread variables, cthreads.  */
    sigsp = (char *) state->basic.uesp;

  /* Push the signal context on the stack.  */
  sigsp -= sizeof (*scp);
  scp = sigsp;

  if (_hurdsig_catch_fault (SIGSEGV))
      assert (_hurdsig_fault_sigcode >= (long int) scp &&
             _hurdsig_fault_sigcode <= (long int) (scp + 1));
      /* We got a fault trying to write the stack frame.
        We cannot set up the signal handler.
        Returning NULL tells our caller, who will nuke us with a SIGILL.  */
      return NULL;
      int ok;

      /* Set up the sigcontext from the current state of the thread.  */

      scp->sc_onstack = ss->sigaltstack.ss_flags & SS_ONSTACK ? 1 : 0;

      /* struct sigcontext is laid out so that starting at sc_regs mimics a
        struct parisc_thread_state.  */
      memcpy (&scp->sc_parisc_thread_state,
             &state->basic, sizeof (state->basic));

      _hurdsig_end_catch_fault ();

      if (! ok)
       return NULL;

  /* Modify the thread state to call the trampoline code on the new stack.  */
  if (rpc_wait)
      /* The signalee thread was blocked in a mach_msg_trap system call,
        still waiting for a reply.  We will have it run the special
        trampoline code which retries the message receive before running
        the signal handler.

        To do this we change the OPTION argument on its stack to enable only
        message reception, since the request message has already been
        sent.  */

      struct mach_msg_trap_regargs *args = (void *) &state->basic.r23;

      if (_hurdsig_catch_fault (SIGSEGV))
         assert (_hurdsig_fault_sigcode >= (long int) args &&
                _hurdsig_fault_sigcode < (long int) (args + 1));
         /* Faulted accessing ARGS.  Bomb.  */
         return NULL;

      assert (args->option & MACH_RCV_MSG);
      /* Disable the message-send, since it has already completed.  The
        calls we retry need only wait to receive the reply message.  */
      args->option &= ~MACH_SEND_MSG;

      /* Limit the time to receive the reply message, in case the server
        claimed that `interrupt_operation' succeeded but in fact the RPC
        is hung.  */
      args->option |= MACH_RCV_TIMEOUT;
      args->timeout = _hurd_interrupted_rpc_timeout;

      _hurdsig_end_catch_fault ();

      MACHINE_THREAD_STATE_SET_PC (&state->basic, &&rpc_wait_trampoline);
      /* The reply-receiving trampoline code runs initially on the original
        user stack.  We pass it the signal stack pointer in %r5.  */
      state->basic.r5 = (int) sigsp;
      /* After doing the message receive, the trampoline code will need to
        update the %r28 value to be restored by sigreturn.  To simplify
        the assembly code, we pass the address of its slot in SCP to the
        trampoline code in %r4.  */
      state->basic.r4 = (unsigned int) &scp->sc_regs[27];
      /* Set up the arguments for the handler function in callee-saved
        registers that we will move to the argument registers after
        mach_msg_trap returns.  */
      state->basic.r6 = signo;
      state->basic.r7 = sigcode;
      state->basic.r8 = (unsigned int) scp;
      MACHINE_THREAD_STATE_SET_PC (&state->basic, &&trampoline);
      state->basic.r20 = (unsigned int) sigsp;
      /* Set up the arguments for the handler function.  */
      state->basic.r26 = signo;
      state->basic.r25 = sigcode;
      state->basic.r24 = (unsigned int) scp;

  /* We pass the handler function to the trampoline code in %r9.  */
  state->basic.r9 = (unsigned int) handler;
  /* For convenience, we pass the address of __sigreturn in %r10.  */
  state->basic.r10 = (unsigned int) &__sigreturn;
  /* The extra copy of SCP for the __sigreturn arg goes in %r8.  */
  state->basic.r10 = (unsigned int) scp;

  return scp;

  /* The trampoline code follows.  This is not actually executed as part of
     this function, it is just convenient to write it that way.  */

  /* This is the entry point when we have an RPC reply message to receive
     before running the handler.  The MACH_MSG_SEND bit has already been
     cleared in the OPTION argument on our stack.  The interrupted user
     stack pointer has not been changed, so the system call can find its
     arguments; the signal stack pointer is in %ebx.  For our convenience,
     %ecx points to the sc_eax member of the sigcontext.  */
  asm volatile
    (/* Retry the interrupted mach_msg system call.  */
     "ldil L%0xC0000000,%r1\nble 4(%sr7,%r1)\n"
     "ldi -25, %r22\n"             /* mach_msg_trap */
     /* When the sigcontext was saved, %r28 was MACH_RCV_INTERRUPTED.  But
       now the message receive has completed and the original caller of
       the RPC (i.e. the code running when the signal arrived) needs to
       see the final return value of the message receive in %r28.  So
       store the new %r28 value into the sc_regs[27] member of the sigcontext
       (whose address is in %r4 to make this code simpler).  */
     "stw (%r4), %r28\n"
     /* Switch to the signal stack.  */
     "copy %r5, %r30\n"
     /* Copy the handler arguments to the argument registers.  */
     "copy %r6, %r26\n"
     "copy %r7, %r25\n"
     "copy %r8, %r24\n"

  /* Entry point for running the handler normally.  The arguments to the
     handler function are already in the argument registers.  */
  asm volatile
    ("bv (%r9); nop"        /* Call the handler function.  */
     "bv (%r10)\n"          /* Call __sigreturn (SCP); never returns.  */
     "copy %r8, %r26"              /* Set up arg in delay slot.  */
     : : "i" (&__sigreturn));

  return NULL;

Here is the call graph for this function: