fet
5.18.0

#include <helpinstructionsform.h>
Public Member Functions  
HelpInstructionsForm (QWidget *parent)  
~HelpInstructionsForm ()  
void  setText () 
Definition at line 23 of file helpinstructionsform.h.
HelpInstructionsForm::HelpInstructionsForm  (  QWidget *  parent  ) 
Definition at line 22 of file helpinstructionsform.cpp.
: QDialog(parent) { setupUi(this); closePushButton>setDefault(true); plainTextEdit>setReadOnly(true); connect(closePushButton, SIGNAL(clicked()), this, SLOT(close())); centerWidgetOnScreen(this); restoreFETDialogGeometry(this); setText(); }
Definition at line 38 of file helpinstructionsform.cpp.
{ saveFETDialogGeometry(this); }
void HelpInstructionsForm::setText  (  ) 
Definition at line 43 of file helpinstructionsform.cpp.
{ QString s; s+=tr("Instructions."); s+="\n\n"; s+=tr("Last modified on %1.").arg(tr("12 October 2009")); s+="\n\n"; s+=tr("These are some small instructions which you have to follow in order to input a solvable data set."); s+="\n\n"; s+=tr("If you get an impossible timetable and your institution allows beginning later for students, please reconsider your students (set) early " "constraints to allow more beginnings at second hour. Also, removing or weakening other constraints might help. If FET cannot find " "a good timetable for your school, make sure to report this, as FET needs to be improved. Maybe small changes to your datafile " "can bring good solutions, or maybe there are aspects which have to be changed in FET."); s+="\n\n"; s+=tr("An impossible timetable might also be caused by incorrect years division. Please check statistics/students for all subgroups, " "each subgroup should have the necessary hours, not less. If you have for instance some subgroups with less than say 20 hours per " "week you might get an impossible timetable, probably because of incorrect division of years and incorrectly added activities. " "All the subgroups are independent and should have an amount of working hours per week close to the average for all " "subgroups. Please see FAQ for more information."); s+="\n\n"; s+=tr("0) Please select correctly the days and hours (working periods). To ensure best performance, it is best to keep the " "number of hours (periods) per day to your required needs, not larger. It is a good practice to choose a value for the number " "of days and number of hours from the beginning (you can change their names anytime you want afterwards)."); s+="\n\n"; s+=tr("1) To say that component activities of a larger split activity are not in the same day, FET automatically adds a " "constraint min days between activities with default 95% weight. If you want to ensure no two activities of same type " "are in the same day, you will have to modify the weight from 95% to higher values (see these constraints in the Time constraints " "menu>Activities>Min days between a set of activities constraints. You have there a powerful filter to change many " "constraints with a few clicks)."); s+="\n\n"; s+=tr("To specify that some activities must be in different days, the min days between activities " "must be 1. To specify that some activities must be separated even more, you can increase the min days to 2 (or even more, " "but probably not needed). Min days = 2 means that activities will be at least 2 days apart from each other (so there is " "another day between them). It is recommended that when inputting activities which are split into only 2 subactivities per week, " "add min days = 2. Or you can, after introducing the activities, to modify the min days value in more constraints at " "once by using the powerful filter in constraints min days between activities dialog (select old number of activities 2 and " "new min days 2, maybe also raise weight percentage to 100%)."); s+="\n\n"; s+=tr("You can use for the constraint min days the weight you want. It can be 95%, 99.75% or even 100%. If you specify a value below " "100% (even 99.75% or more) for an impossible constraint, FET will be able to detect that it is impossible and obtain a " "timetable in the end, so the weight is subjective. So, the best way would be to choose a 99.75% for all constraints, " "but the time of generation might be larger than with 95%. You could try at first the 95% minimum recommended value, then " "highten the weight percentage up to maybe 99.75% or 100%. I am not sure here, I have not enough sample files (please contribute with advice)."); s+="\n\n"; s+=tr("If you would like to change the default 95% for another value for some constraints of type min days, the easiest way " "is in Data/Time constraints/Min days between activities dialog, where starting with version 5.6.1 there is a " "very powerful dialog, where you can specify a filter (old values) and new values for the selected constraints."); s+="\n\n"; s+=tr("You might want to choose different weights for different constraint min days (for instance, higher on subjects with less activities per week)"); s+="\n\n"; s+=tr("In versions 5.5.8 and higher, you can add 2 constraints min days for the same split activity. In add activity " "dialog, select min days 2 (or 3) and you get the chance to add another constraint min 1 days (or 2). For instance, if you have 3 " "activities per week from the same group, you can add 2 constraints, min 2 days and min 1 day, both with 95%. This will ensure that " "in 99.75% of cases the min 1 day will be respected."); s+="\n\n"; s+=tr("2) If you have a course lesson with say 45 activities per week, difficult lessons (Maths), which you would like to schedule " "in the beginning of the day (say 3 out of 45 need to be in the first half of the day), the best approach is to use constraint " "subactivities preferred time slots or starting times, specifying possibly the subject and component number: 1, 2 and maybe 3" ", adding 3 constraints for this subject (see FAQ for more details). You can also add constraints for component numbers 3, 4 " "and 5 for subject Maths (this way, if activity is split into 4 it will get 2 early, if it is split into 5 it will get 3 " "early  a nice trick). Similarly, if you have say Bio with 1 or 2 splits per week, you can add constraint with component number = 2."); s+="\n\n"; s+=tr("3) From the way the algorithm is conceived, the automatic generation is faster if you use students set (or teacher) " "not available and/or constraint activity(ies) preferred time slots or preferred starting times to specify impossible slots, " "in addition to possible use of students (set) or teacher(s) max hours daily, whenever it is possible. For instance, " "if you know that year 5 will only have hours from 8:00 to 13:00, it is better to add students set not available in " "addition to students set max hours daily. So, if possible, try to follow this advice. This trick helps guide FET better towards a solution."); s+="\n\n"; s+=tr("Each constraint of type not available or preferred times which filters out impossible slots might bring an improvement in speed."); s+="\n\n"; s+=tr("4) Constraint students (set) early: if you input only partial data, you might get impossible timetables (see FAQ for details)."); s+="\n\n"; s+=tr("5) For teacher(s) gaps: please note that FET will take care of teacher(s) gaps only if you tell it so, by adding constraint " "teacher(s) max gaps per week. It is normal to add such constraint(s) after you saw that the data is solvable, using for max " "gaps a value which seems acceptable, lowering it as you find timetables."); s+="\n\n"; s+=tr("6) Rooms: You might firstly try to generate a timetable without rooms, to see if it is possible, then add rooms and rooms related constraints."); s+="\n\n"; s+=tr("7) It is possible to work with institutions in which the students work in shifts (for instance, lowest forms in the morning and " "highest forms in the afternoon). Please see the Help/Frequently Asked Questions the solution to how to do that " "(the essence is to add corresponding constraints students set not available)."); s+="\n\n"; s+=tr("8) The new algorithm (after version 5.0.0) does not accept fortnightly activities. But you might apply a trick." " Please see menu Help/Frequently Asked Questions menu (it has the description of a possible trick) " "(the essence is to make a weekly activity with the sum of teachers and students of both fortnightly activities)"); s+="\n\n"; s+=tr("9) Even if it takes a long time to generate your timetable with a set of constraints, strengthening the constraints might not " "slow the generation too much. You are adviced to try with stronger constraints after you obtain timetables, because you can " "obtain better timetables this way."); s+="\n\n"; s+=tr("10) If a constraint is allowed values under 100%, you can use any weight, even fractional numbers like 99.75%. " "It might help in constraints like min days, preferred rooms or max hours daily."); s+="\n\n"; s+=tr("11) Each room can host a single activity at the same time. If you have a large room which can host more " "activities at the same time, you need to use a small trick. You can add more rooms representing this large room " "and add corresponding constraints preferred rooms. There is an entry in the FAQ about that."); s+="\n\n"; s+=tr("12) If teachers are getting days with only one hour of work, you might want to add constraint teacher(s) " "min hours daily (probably with 2 hours), but please make sure your timetable is possible. This constraint is " "smart, it only considers nonempty days."); s+="\n\n"; s+=tr("13) If you have for instance 7 hours of Maths on a 5 days week (more lessons than days), " "please respect the correct way to add these as a split activity. See question Q127March2008 from FAQ. It is important!"); s+="\n\n"; s+=tr("14) It is recommended to remove redundant min days constraints after adding constraints same starting day or time (read Help/Important tips)."); s+="\n\n"; s+=tr("15) If you want for instance teachers (or students) not to have more than 2 times per week " "activities in the last hours, you have to use new constraint teacher(s) or students (set) hourly interval " "max days per week. Please read FAQ for more details."); s+="\n\n"; s+=tr("16) If you have activities which you want to put in the last slots of a day (like say " "the meetings with the class master), please use the new constraint a set of activities end students day (or singular activity ends students day)."); s+="\n\n"; s+=tr("17) If you have activities split into 3 activities per week and need them to be not " "in 3 consecutive days, there is an entry in the FAQ explaining how to specify this (question Q15September2008)."); s+="\n\n"; s+=tr("18) If you use the not perfect constraints activity tag max hours daily or students max gaps per week (there are 4+2" " types of constraints in this category), use them with caution not to obtain an impossible timetable. If the timetable is impossible, it may be because of them." " You are advised to add such constraints only in the end, after you are sure that the other constraints are good and the timetable is possible."); plainTextEdit>setPlainText(s); }