Back to index

cell-binutils  2.17cvs20070401
Defines | Functions | Variables
m68hc11-dis.c File Reference
#include <stdio.h>
#include "ansidecl.h"
#include "opcode/m68hc11.h"
#include "dis-asm.h"

Go to the source code of this file.

Defines

#define PC_REGNUM   3
#define OP_PAGE_MASK   (M6811_OP_PAGE2|M6811_OP_PAGE3|M6811_OP_PAGE4)
#define M6812_DST_MOVE   (M6812_OP_IND16_P2 | M6812_OP_IDX_P2)
#define M6812_INDEXED_FLAGS   (M6812_OP_IDX|M6812_OP_IDX_1|M6812_OP_IDX_2)

Functions

static int read_memory (bfd_vma, bfd_byte *, int, struct disassemble_info *)
static int print_indexed_operand (bfd_vma, struct disassemble_info *, int *, int, int, bfd_vma)
static int print_insn (bfd_vma, struct disassemble_info *, int)
int print_insn_m68hc11 (bfd_vma memaddr, struct disassemble_info *info)
int print_insn_m68hc12 (bfd_vma memaddr, struct disassemble_info *info)

Variables

static const char *const reg_name []
static const char *const reg_src_table []
static const char *const reg_dst_table []

Define Documentation

Definition at line 40 of file m68hc11-dis.c.

#define PC_REGNUM   3

Definition at line 26 of file m68hc11-dis.c.


Function Documentation

static int print_indexed_operand ( bfd_vma  memaddr,
struct disassemble_info info,
int indirect,
int  mov_insn,
int  pc_offset,
bfd_vma  endaddr 
) [static]

Definition at line 69 of file m68hc11-dis.c.

{
  bfd_byte buffer[4];
  int reg;
  int status;
  short sval;
  int pos = 1;

  if (indirect)
    *indirect = 0;

  status = read_memory (memaddr, &buffer[0], 1, info);
  if (status != 0)
    {
      return status;
    }

  /* n,r with 5-bits signed constant.  */
  if ((buffer[0] & 0x20) == 0)
    {
      reg = (buffer[0] >> 6) & 3;
      sval = (buffer[0] & 0x1f);
      if (sval & 0x10)
       sval |= 0xfff0;
      /* 68HC12 requires an adjustment for movb/movw pc relative modes.  */
      if (reg == PC_REGNUM && info->mach == bfd_mach_m6812 && mov_insn)
        sval += pc_offset;
      (*info->fprintf_func) (info->stream, "%d,%s",
                          (int) sval, reg_name[reg]);

      if (reg == PC_REGNUM)
        {
          (* info->fprintf_func) (info->stream, " {");
          (* info->print_address_func) (endaddr + sval, info);
          (* info->fprintf_func) (info->stream, "}");
        }
    }

  /* Auto pre/post increment/decrement.  */
  else if ((buffer[0] & 0xc0) != 0xc0)
    {
      const char *mode;

      reg = (buffer[0] >> 6) & 3;
      sval = (buffer[0] & 0x0f);
      if (sval & 0x8)
       {
         sval |= 0xfff0;
         sval = -sval;
         mode = "-";
       }
      else
       {
         sval = sval + 1;
         mode = "+";
       }
      (*info->fprintf_func) (info->stream, "%d,%s%s%s",
                          (int) sval,
                          (buffer[0] & 0x10 ? "" : mode),
                          reg_name[reg], (buffer[0] & 0x10 ? mode : ""));
    }

  /* [n,r] 16-bits offset indexed indirect.  */
  else if ((buffer[0] & 0x07) == 3)
    {
      if (mov_insn)
       {
         (*info->fprintf_func) (info->stream, "<invalid op: 0x%x>",
                             buffer[0] & 0x0ff);
         return 0;
       }
      reg = (buffer[0] >> 3) & 0x03;
      status = read_memory (memaddr + pos, &buffer[0], 2, info);
      if (status != 0)
       {
         return status;
       }

      pos += 2;
      sval = ((buffer[0] << 8) | (buffer[1] & 0x0FF));
      (*info->fprintf_func) (info->stream, "[%u,%s]",
                          sval & 0x0ffff, reg_name[reg]);
      if (indirect)
        *indirect = 1;
    }

  /* n,r with 9 and 16 bit signed constant.  */
  else if ((buffer[0] & 0x4) == 0)
    {
      if (mov_insn)
       {
         (*info->fprintf_func) (info->stream, "<invalid op: 0x%x>",
                             buffer[0] & 0x0ff);
         return 0;
       }
      reg = (buffer[0] >> 3) & 0x03;
      status = read_memory (memaddr + pos,
                         &buffer[1], (buffer[0] & 0x2 ? 2 : 1), info);
      if (status != 0)
       {
         return status;
       }
      if (buffer[0] & 2)
       {
         sval = ((buffer[1] << 8) | (buffer[2] & 0x0FF));
         sval &= 0x0FFFF;
         pos += 2;
          endaddr += 2;
       }
      else
       {
         sval = buffer[1] & 0x00ff;
         if (buffer[0] & 0x01)
           sval |= 0xff00;
         pos++;
          endaddr++;
       }
      (*info->fprintf_func) (info->stream, "%d,%s",
                          (int) sval, reg_name[reg]);
      if (reg == PC_REGNUM)
        {
          (* info->fprintf_func) (info->stream, " {");
          (* info->print_address_func) (endaddr + sval, info);
          (* info->fprintf_func) (info->stream, "}");
        }
    }
  else
    {
      reg = (buffer[0] >> 3) & 0x03;
      switch (buffer[0] & 3)
       {
       case 0:
         (*info->fprintf_func) (info->stream, "A,%s", reg_name[reg]);
         break;
       case 1:
         (*info->fprintf_func) (info->stream, "B,%s", reg_name[reg]);
         break;
       case 2:
         (*info->fprintf_func) (info->stream, "D,%s", reg_name[reg]);
         break;
       case 3:
       default:
         (*info->fprintf_func) (info->stream, "[D,%s]", reg_name[reg]);
          if (indirect)
            *indirect = 1;
         break;
       }
    }

  return pos;
}

Here is the call graph for this function:

Here is the caller graph for this function:

static int print_insn ( bfd_vma  memaddr,
struct disassemble_info info,
int  arch 
) [static]

Definition at line 226 of file m68hc11-dis.c.

{
  int status;
  bfd_byte buffer[4];
  unsigned char code;
  long format, pos, i;
  short sval;
  const struct m68hc11_opcode *opcode;

  /* Get first byte.  Only one at a time because we don't know the
     size of the insn.  */
  status = read_memory (memaddr, buffer, 1, info);
  if (status != 0)
    {
      return status;
    }

  format = 0;
  code = buffer[0];
  pos = 0;

  /* Look for page2,3,4 opcodes.  */
  if (code == M6811_OPCODE_PAGE2)
    {
      pos++;
      format = M6811_OP_PAGE2;
    }
  else if (code == M6811_OPCODE_PAGE3 && arch == cpu6811)
    {
      pos++;
      format = M6811_OP_PAGE3;
    }
  else if (code == M6811_OPCODE_PAGE4 && arch == cpu6811)
    {
      pos++;
      format = M6811_OP_PAGE4;
    }

  /* We are in page2,3,4; get the real opcode.  */
  if (pos == 1)
    {
      status = read_memory (memaddr + pos, &buffer[1], 1, info);
      if (status != 0)
       {
         return status;
       }
      code = buffer[1];
    }


  /* Look first for a 68HC12 alias.  All of them are 2-bytes long and
     in page 1.  There is no operand to print.  We read the second byte
     only when we have a possible match.  */
  if ((arch & cpu6812) && format == 0)
    {
      int must_read = 1;

      /* Walk the alias table to find a code1+code2 match.  */
      for (i = 0; i < m68hc12_num_alias; i++)
       {
         if (m68hc12_alias[i].code1 == code)
           {
             if (must_read)
              {
                status = read_memory (memaddr + pos + 1,
                                   &buffer[1], 1, info);
                if (status != 0)
                  break;

                must_read = 1;
              }
             if (m68hc12_alias[i].code2 == (unsigned char) buffer[1])
              {
                (*info->fprintf_func) (info->stream, "%s",
                                    m68hc12_alias[i].name);
                return 2;
              }
           }
       }
    }

  pos++;

  /* Scan the opcode table until we find the opcode
     with the corresponding page.  */
  opcode = m68hc11_opcodes;
  for (i = 0; i < m68hc11_num_opcodes; i++, opcode++)
    {
      int offset;
      int pc_src_offset;
      int pc_dst_offset = 0;

      if ((opcode->arch & arch) == 0)
       continue;
      if (opcode->opcode != code)
       continue;
      if ((opcode->format & OP_PAGE_MASK) != format)
       continue;

      if (opcode->format & M6812_OP_REG)
       {
         int j;
         int is_jump;

         if (opcode->format & M6811_OP_JUMP_REL)
           is_jump = 1;
         else
           is_jump = 0;

         status = read_memory (memaddr + pos, &buffer[0], 1, info);
         if (status != 0)
           {
             return status;
           }
         for (j = 0; i + j < m68hc11_num_opcodes; j++)
           {
             if ((opcode[j].arch & arch) == 0)
              continue;
             if (opcode[j].opcode != code)
              continue;
             if (is_jump)
              {
                if (!(opcode[j].format & M6811_OP_JUMP_REL))
                  continue;

                if ((opcode[j].format & M6812_OP_IBCC_MARKER)
                    && (buffer[0] & 0xc0) != 0x80)
                  continue;
                if ((opcode[j].format & M6812_OP_TBCC_MARKER)
                    && (buffer[0] & 0xc0) != 0x40)
                  continue;
                if ((opcode[j].format & M6812_OP_DBCC_MARKER)
                    && (buffer[0] & 0xc0) != 0)
                  continue;
                if ((opcode[j].format & M6812_OP_EQ_MARKER)
                    && (buffer[0] & 0x20) == 0)
                  break;
                if (!(opcode[j].format & M6812_OP_EQ_MARKER)
                    && (buffer[0] & 0x20) != 0)
                  break;
                continue;
              }
             if (opcode[j].format & M6812_OP_EXG_MARKER && buffer[0] & 0x80)
              break;
             if ((opcode[j].format & M6812_OP_SEX_MARKER)
                && (((buffer[0] & 0x07) >= 3 && (buffer[0] & 7) <= 7))
                && ((buffer[0] & 0x0f0) <= 0x20))
              break;
             if (opcode[j].format & M6812_OP_TFR_MARKER
                && !(buffer[0] & 0x80))
              break;
           }
         if (i + j < m68hc11_num_opcodes)
           opcode = &opcode[j];
       }

      /* We have found the opcode.  Extract the operand and print it.  */
      (*info->fprintf_func) (info->stream, "%s", opcode->name);

      format = opcode->format;
      if (format & (M6811_OP_MASK | M6811_OP_BITMASK
                  | M6811_OP_JUMP_REL | M6812_OP_JUMP_REL16))
       {
         (*info->fprintf_func) (info->stream, "\t");
       }

      /* The movb and movw must be handled in a special way...
         The source constant 'ii' is not always at the same place.
         This is the same for the destination for the post-indexed byte.
         The 'offset' is used to do the appropriate correction.

                                   offset          offset
                              for constant     for destination
         movb   18 OB ii hh ll       0          0
                18 08 xb ii          1          -1
                18 0C hh ll hh ll    0          0
                18 09 xb hh ll       1          -1
                18 0D xb hh ll       0          0
                18 0A xb xb          0          0

         movw   18 03 jj kk hh ll    0          0
                18 00 xb jj kk       1          -1
                18 04 hh ll hh ll    0          0
                18 01 xb hh ll       1          -1
                18 05 xb hh ll       0          0
                18 02 xb xb          0          0

         After the source operand is read, the position 'pos' is incremented
         this explains the negative offset for destination.

         movb/movw above are the only instructions with this matching
         format.  */
      offset = ((format & M6812_OP_IDX_P2)
                && (format & (M6811_OP_IMM8 | M6811_OP_IMM16 |
                              M6811_OP_IND16)));

      /* Operand with one more byte: - immediate, offset,
         direct-low address.  */
      if (format &
         (M6811_OP_IMM8 | M6811_OP_IX | M6811_OP_IY | M6811_OP_DIRECT))
       {
         status = read_memory (memaddr + pos + offset, &buffer[0], 1, info);
         if (status != 0)
           {
             return status;
           }

         pos++;

          /* This movb/movw is special (see above).  */
          offset = -offset;

          pc_dst_offset = 2;
         if (format & M6811_OP_IMM8)
           {
             (*info->fprintf_func) (info->stream, "#%d", (int) buffer[0]);
             format &= ~M6811_OP_IMM8;
              /* Set PC destination offset.  */
              pc_dst_offset = 1;
           }
         else if (format & M6811_OP_IX)
           {
             /* Offsets are in range 0..255, print them unsigned.  */
             (*info->fprintf_func) (info->stream, "%u,x", buffer[0] & 0x0FF);
             format &= ~M6811_OP_IX;
           }
         else if (format & M6811_OP_IY)
           {
             (*info->fprintf_func) (info->stream, "%u,y", buffer[0] & 0x0FF);
             format &= ~M6811_OP_IY;
           }
         else if (format & M6811_OP_DIRECT)
           {
             (*info->fprintf_func) (info->stream, "*");
             (*info->print_address_func) (buffer[0] & 0x0FF, info);
             format &= ~M6811_OP_DIRECT;
           }
       }

#define M6812_DST_MOVE  (M6812_OP_IND16_P2 | M6812_OP_IDX_P2)
#define M6812_INDEXED_FLAGS (M6812_OP_IDX|M6812_OP_IDX_1|M6812_OP_IDX_2)
      /* Analyze the 68HC12 indexed byte.  */
      if (format & M6812_INDEXED_FLAGS)
       {
          int indirect;
          bfd_vma endaddr;

          endaddr = memaddr + pos + 1;
          if (format & M6811_OP_IND16)
            endaddr += 2;
          pc_src_offset = -1;
          pc_dst_offset = 1;
         status = print_indexed_operand (memaddr + pos, info, &indirect,
                                          (format & M6812_DST_MOVE),
                                          pc_src_offset, endaddr);
         if (status < 0)
           {
             return status;
           }
         pos += status;

          /* The indirect addressing mode of the call instruction does
             not need the page code.  */
          if ((format & M6812_OP_PAGE) && indirect)
            format &= ~M6812_OP_PAGE;
       }

      /* 68HC12 dbcc/ibcc/tbcc operands.  */
      if ((format & M6812_OP_REG) && (format & M6811_OP_JUMP_REL))
       {
         status = read_memory (memaddr + pos, &buffer[0], 2, info);
         if (status != 0)
           {
             return status;
           }
         (*info->fprintf_func) (info->stream, "%s,",
                             reg_src_table[buffer[0] & 0x07]);
         sval = buffer[1] & 0x0ff;
         if (buffer[0] & 0x10)
           sval |= 0xff00;

         pos += 2;
         (*info->print_address_func) (memaddr + pos + sval, info);
         format &= ~(M6812_OP_REG | M6811_OP_JUMP_REL);
       }
      else if (format & (M6812_OP_REG | M6812_OP_REG_2))
       {
         status = read_memory (memaddr + pos, &buffer[0], 1, info);
         if (status != 0)
           {
             return status;
           }

         pos++;
         (*info->fprintf_func) (info->stream, "%s,%s",
                             reg_src_table[(buffer[0] >> 4) & 7],
                             reg_dst_table[(buffer[0] & 7)]);
       }

      if (format & (M6811_OP_IMM16 | M6811_OP_IND16))
       {
         int val;
          bfd_vma addr;
          unsigned page = 0;

         status = read_memory (memaddr + pos + offset, &buffer[0], 2, info);
         if (status != 0)
           {
             return status;
           }
         if (format & M6812_OP_IDX_P2)
           offset = -2;
         else
           offset = 0;
         pos += 2;

         val = ((buffer[0] << 8) | (buffer[1] & 0x0FF));
         val &= 0x0FFFF;
          addr = val;
          pc_dst_offset = 2;
          if (format & M6812_OP_PAGE)
            {
              status = read_memory (memaddr + pos + offset, buffer, 1, info);
              if (status != 0)
                return status;

              page = (unsigned) buffer[0];
              if (addr >= M68HC12_BANK_BASE && addr < 0x0c000)
                addr = ((val - M68HC12_BANK_BASE)
                        | (page << M68HC12_BANK_SHIFT))
                   + M68HC12_BANK_VIRT;
            }
          else if ((arch & cpu6812)
                   && addr >= M68HC12_BANK_BASE && addr < 0x0c000)
             {
                int cur_page;
                bfd_vma vaddr;
                
                if (memaddr >= M68HC12_BANK_VIRT)
                   cur_page = ((memaddr - M68HC12_BANK_VIRT)
                               >> M68HC12_BANK_SHIFT);
                else
                   cur_page = 0;

                vaddr = ((addr - M68HC12_BANK_BASE)
                         + (cur_page << M68HC12_BANK_SHIFT))
                   + M68HC12_BANK_VIRT;
                if (!info->symbol_at_address_func (addr, info)
                    && info->symbol_at_address_func (vaddr, info))
                   addr = vaddr;
             }
         if (format & M6811_OP_IMM16)
           {
             format &= ~M6811_OP_IMM16;
             (*info->fprintf_func) (info->stream, "#");
           }
         else
           format &= ~M6811_OP_IND16;

         (*info->print_address_func) (addr, info);
          if (format & M6812_OP_PAGE)
            {
              (* info->fprintf_func) (info->stream, " {");
              (* info->print_address_func) (val, info);
              (* info->fprintf_func) (info->stream, ", %d}", page);
              format &= ~M6812_OP_PAGE;
              pos += 1;
            }
       }

      if (format & M6812_OP_IDX_P2)
       {
         (*info->fprintf_func) (info->stream, ", ");
         status = print_indexed_operand (memaddr + pos + offset, info,
                                          0, 1, pc_dst_offset,
                                          memaddr + pos + offset + 1);
         if (status < 0)
           return status;
         pos += status;
       }

      if (format & M6812_OP_IND16_P2)
       {
         int val;

         (*info->fprintf_func) (info->stream, ", ");

         status = read_memory (memaddr + pos + offset, &buffer[0], 2, info);
         if (status != 0)
           {
             return status;
           }
         pos += 2;

         val = ((buffer[0] << 8) | (buffer[1] & 0x0FF));
         val &= 0x0FFFF;
         (*info->print_address_func) (val, info);
       }

      /* M6811_OP_BITMASK and M6811_OP_JUMP_REL must be treated separately
         and in that order.  The brset/brclr insn have a bitmask and then
         a relative branch offset.  */
      if (format & M6811_OP_BITMASK)
       {
         status = read_memory (memaddr + pos, &buffer[0], 1, info);
         if (status != 0)
           {
             return status;
           }
         pos++;
         (*info->fprintf_func) (info->stream, " #$%02x%s",
                             buffer[0] & 0x0FF,
                             (format & M6811_OP_JUMP_REL ? " " : ""));
         format &= ~M6811_OP_BITMASK;
       }
      if (format & M6811_OP_JUMP_REL)
       {
         int val;

         status = read_memory (memaddr + pos, &buffer[0], 1, info);
         if (status != 0)
           {
             return status;
           }

         pos++;
         val = (buffer[0] & 0x80) ? buffer[0] | 0xFFFFFF00 : buffer[0];
         (*info->print_address_func) (memaddr + pos + val, info);
         format &= ~M6811_OP_JUMP_REL;
       }
      else if (format & M6812_OP_JUMP_REL16)
       {
         int val;

         status = read_memory (memaddr + pos, &buffer[0], 2, info);
         if (status != 0)
           {
             return status;
           }

         pos += 2;
         val = ((buffer[0] << 8) | (buffer[1] & 0x0FF));
         if (val & 0x8000)
           val |= 0xffff0000;

         (*info->print_address_func) (memaddr + pos + val, info);
         format &= ~M6812_OP_JUMP_REL16;
       }

      if (format & M6812_OP_PAGE)
       {
         int val;

         status = read_memory (memaddr + pos + offset, &buffer[0], 1, info);
         if (status != 0)
           {
             return status;
           }
         pos += 1;

         val = buffer[0] & 0x0ff;
         (*info->fprintf_func) (info->stream, ", %d", val);
       }
      
#ifdef DEBUG
      /* Consistency check.  'format' must be 0, so that we have handled
         all formats; and the computed size of the insn must match the
         opcode table content.  */
      if (format & ~(M6811_OP_PAGE4 | M6811_OP_PAGE3 | M6811_OP_PAGE2))
       {
         (*info->fprintf_func) (info->stream, "; Error, format: %lx", format);
       }
      if (pos != opcode->size)
       {
         (*info->fprintf_func) (info->stream, "; Error, size: %ld expect %d",
                             pos, opcode->size);
       }
#endif
      return pos;
    }

  /* Opcode not recognized.  */
  if (format == M6811_OP_PAGE2 && arch & cpu6812
      && ((code >= 0x30 && code <= 0x39) || (code >= 0x40)))
    (*info->fprintf_func) (info->stream, "trap\t#%d", code & 0x0ff);

  else if (format == M6811_OP_PAGE2)
    (*info->fprintf_func) (info->stream, ".byte\t0x%02x, 0x%02x",
                        M6811_OPCODE_PAGE2, code);
  else if (format == M6811_OP_PAGE3)
    (*info->fprintf_func) (info->stream, ".byte\t0x%02x, 0x%02x",
                        M6811_OPCODE_PAGE3, code);
  else if (format == M6811_OP_PAGE4)
    (*info->fprintf_func) (info->stream, ".byte\t0x%02x, 0x%02x",
                        M6811_OPCODE_PAGE4, code);
  else
    (*info->fprintf_func) (info->stream, ".byte\t0x%02x", code);

  return pos;
}

Here is the call graph for this function:

Here is the caller graph for this function:

Definition at line 730 of file m68hc11-dis.c.

{
  return print_insn (memaddr, info, cpu6811);
}

Here is the call graph for this function:

Here is the caller graph for this function:

Definition at line 736 of file m68hc11-dis.c.

{
  return print_insn (memaddr, info, cpu6812);
}

Here is the call graph for this function:

Here is the caller graph for this function:

static int read_memory ( bfd_vma  memaddr,
bfd_byte buffer,
int  size,
struct disassemble_info info 
) [static]

Definition at line 49 of file m68hc11-dis.c.

{
  int status;

  /* Get first byte.  Only one at a time because we don't know the
     size of the insn.  */
  status = (*info->read_memory_func) (memaddr, buffer, size, info);
  if (status != 0)
    {
      (*info->memory_error_func) (status, memaddr, info);
      return -1;
    }
  return 0;
}

Here is the caller graph for this function:


Variable Documentation

const char* const reg_dst_table[] [static]
Initial value:
 {
  "A", "B", "CCR", "TMP2", "D", "X", "Y", "SP"
}

Definition at line 36 of file m68hc11-dis.c.

const char* const reg_name[] [static]
Initial value:
 {
  "X", "Y", "SP", "PC"
}

Definition at line 28 of file m68hc11-dis.c.

const char* const reg_src_table[] [static]
Initial value:
 {
  "A", "B", "CCR", "TMP3", "D", "X", "Y", "SP"
}

Definition at line 32 of file m68hc11-dis.c.